unisonic technologies co., ltd BTB24A preliminary triac www.unisonic.com.tw 1 of 3 copyright ? 2013 unisonic technologies co., ltd qw-r401-060.a 25a triacs ? description the utc BTB24A is a 25a triacs which can be operated in 3 quadrants only, it uses utc?s advanced technology to provide customers with high commutat ion performances and voltage insulated tab, etc. the utc BTB24A is suitable for inductive load switching operations, also can be used in on /off function applications such as induction motor starting circui ts, heating regulation, static relays etc. ? symbol ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 BTB24Al-x-xx-ta3-t BTB24Ag-x-xx-ta3-t to-220 mt1 mt2 g tube ? sensitivity and type part number voltage sensitivity type 600v 800v bw 50ma snubberless cw 35ma snubberless : available ? marking information package marking to-220
BTB24A preliminary triac unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r401-060.a ? absolute maximum ratings parameter symbol ratings unit rms on-state current (full sine wave) t c =75c i t ( rms ) 25 a non repetitive surge peak on-state current (full cycle, t j initial=25c) f=50 hz t=20ms i tsm 250 a f=60 hz t=16.7ms 260 a i 2 t value for fusing t p =10ms i 2 t 340 a 2 s critical rate of rise of on-state current i g =2xi gt , tr 100ns f=120 hz t j =125c di/dt 50 a/s non repetitive surge peak off-state voltage t p =10ms t j =25c v dsm /v rsm v drm /v rrm +100 v peak gate current t p =20s t j =125c i gm 4 a average gate power dissipation t j =125c p g ( av ) 1 w operating junction temperature t j -40~+125 c storage junction temperature t stg -40~+150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal resistances parameter symbol ratings unit junction to ambient ja 60 c/w junction to case (ac) jc 0.8 c/w ? electrical characteristics (t j =25 c unless otherwise specified.) parameter symbol test conditions cw bw unit min typ max min typ max snubberless type (3 quadrants) gate trigger current (note 1) i gt v d =12v, r l =33 ? i-ii-iii 35 50 ma gate trigger voltage v gt i-ii-iii 1.3 1.3 v gate non-trigger voltage v gd v d =v drm , r l =3.3k ? , t j =125c i-ii-iii 0.2 0.2 v holding current (note 2) i h i t =500ma 50 75 ma latching current i l i g =1.2i gt i-iii 70 80 ma ii 80 100 ma critical rate of rise of off-state voltage (note 2) dv/dt v d =67%v drm , gate open, t j =125c 500 1000 v/s critical rate of rise of off-state voltage at commutation (note 2) (di/dt)c without snubber, t j =125c 13 22 a/ms ? static characteristics parameter symbol test conditions min typ max unit peak on-state voltage (note 2) v tm i tm =35a, t p =380 s t j =25c 1.55 v threshold voltage (note 2) v to t j =125c 0.85 v dynamic resistance (note 2) r d t j =125c 16 m ? repetitive peak off-state current i drm v drm =v rrm t j =25c 5 a i rrm t j =125c 3 ma note: 1. minimum i gt is guaranteed at 5% of i gt max. 2. for both polarities of mt2 referenced to mt1.
BTB24A preliminary triac unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r401-060.a utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
